Wednesday, October 30, 2019

Parking Problems in the Florida National University Essay

Parking Problems in the Florida National University - Essay Example In the Florida National University, the issue of parking and campus traffic is increasingly crippling movement. This paper will show policies that can be adopted by the university to reduce parking problems. In many colleges, the problem is addressed by restricting students driving, or simply by allocating parking slots on a first-come-first-served basis (Shoup 21). While these approaches have produced varying levels of success, they have significantly reduced on-campus traffic. However, there are a few associated problems. For example, disabled students should be allowed to drive or be driven to school because o their conditions. In addition, lecturers and other important staff members serve the concern of a large number of people, implying they should not be required to compete with students for parking space in their places of work (Shoup 21). Therefore, despite the merits of the mentioned approaches, there is a need for more conclusive approaches. An economy-based approach has been proposed by Shoup. He proposes that in controlling the parking fees for students and other staff in campuses, it is possible to reduce traffic (Shoup 29). For example, parking lots close to lecture halls and offices are susceptible to traffic congestions. Raising the parking fee in these areas is likely to take them out of the reach of students and thus reduce traffic. Following the laws of economics, reducing the demand increases the supply. Therefore, increasing the prices of parking tickets in vital areas is bound to reduce the strain of parking problems on the campus. However, there is still a predicament with this approach because it requires all people to pay for parking. By extension, all members of staff and special needs groups with no alternative would fall victim to the plan. Therefore, despite the merits of this plan, it raises other problems (Kilbert and Tali 65).

Monday, October 28, 2019

Promoting autonomy of oneself and others Essay Example for Free

Promoting autonomy of oneself and others Essay Introduction                     Autonomy is the ability to have the capacity for self-governance or have self- determination. This is a concept which comes out through various arenas. For example, the moral autonomy is usually governed by the moral laws ( Deci, 2010). Therefore, personal autonomy can be said to be the capacity of a person to pursue actions based on moral content. This paper will compare the philosophical work by Nietzsche and MacIntyre and determine who offers the best tool of promoting autonomy. Over the past centuries, the teachings of Friedrich Nietzsche have transformed and penetrated every realm of social culture in the Western world. In his essays, he examines the significance of people’s ability to make promises. He states that to hold to the promises made requires both confidence about the future and very powerful memory that will ensure that certain issues are not forgotten. According to Nietzsche confidence requires one to be predictable or calculable and, therefore, he or she must share common sets of customs and laws that govern his or her behaviour (Risse, 2001). The society and morality play an important part of making a person predictable, therefore, giving the person ability to make promises. This process according to Nietzsche is complicated as it ends up in the ‘sovereign person’ who can make decisions, not only because the person in question is bounded by social mores but because he or she is the master of his or her own free will. The sovereign of an individual is characterised by tremendous responsibilities of one being free to make claims in regard to his or her future. This sense of responsibility according to Nietzsche is called conscience (Risse, 2001). Nietzsche defines the concept of ‘bad conscience and guiltiness using German words for ‘debt’ and ‘guilt. He suggested that, originally, there were no relationship between guilt and accountability or immorality. Punishments were meted on the basis of reprisal and not on the basis of guilt. If a person failed to honour promises, then they were considered to be in debt the person they failed. The debt could then be balanced by punishing or torturing the person. This happened to a person say the creditor who had no interest of getting his money back from the debtor. Thus, the memory of making promises during this time was burdened and the punishments and cruelty ensured that the debtor does not forget his promises next time (Risse, 2001). Macintyre’s in his book, ‘After Virtue (1981)’ explains his long ethical project. The book diagnoses the rising issues in the society such as ‘culture of emotivism’ where the moral language pragmatically manipulates decisions, attitude and decision. According to the book, those moral cultures are said to be a theatre of illusion where the objectives of moral rhetoric masks the decisions. The books examine the part of the community in making the judgments about the truth or falsity. The work by MacIntyre also examines the reasons why human beings need virtues through investigating the social debts and needs of human agents and the part which they were playing in the formation of an independent practical person who can reason (Borden, 2007). The philosophy by Maclntyre’s is very important especially to the fields of communitarian politics and the virtues of ethics. He points out the insignificance of conventional business ethic as an application of the modern moral concepts in decision making. His work in philosophy has lead tremendous renewal of values over the last decades. For example, in his works his discusses the moral condemnation of Stalinism. His presentation of this concept draws two important conclusions related to morality, one is the fact of the people’s solidarity in discovering what people want in their moral life (Borden, 2007).. According to MacIntyre morality organises life of the community. As he concludes his book, he says that the concepts of morality are neither historical nor timeless and, therefore, the understanding the developments of historical, ethical concepts can liberate people from any falsity claims (Borden, 2007). MacIntyre’s Aristotelian offers the best tool of promoting autonomy of one self and others compared to Nietzsche because he examines the habits that humans should develop in order to make judgement and act efficiently in the pursuit of the true choices which have a worthy end. His examination has a very rich account on the deliberate activities by human that encompass moral formation and society life. He also accounts why humans have practical wisdom to do what is right based on the freedom of morality. References Borden, S. L. (2007). Journalism as practice: MacIntyre, virtue ethics and the press. Ashgate Publishing, Ltd.. Deci, E. L., Ryan, R. M. (2010). The support of autonomy and the control of behavior. Journal of personality and social psychology, 53(6), 1024.Risse, M. (2001). The Second Treatise in In the Genealogy of Morality: Nietzsche on the Origin of the Bad Conscience. European Journal of Philosophy, 9(1), 55-81. Source document

Saturday, October 26, 2019

Leaving the Cocoon :: Example Personal Narratives

Leaving the Cocoon I wasn't quite sure how to react. I had never been called a "white boy" before, especially by someone I hardly knew. As I turned my head not knowing what to expect, I found myself face to face with a grinning boy, whose crooked smile gave him an almost devilish appearance. This was my first encounter with Oscar Jovel, an El Salvadorian student on our trip to Thailand over the summer. You could imagine my delight when I heard that we would be living together with a Thai family and sharing the same bed for six straight weeks. During the next couple of days I was faint with apprehension. The first thing both of our eyes fell on when we arrived at our tiny Thai house was the five by four foot bed we would share. It was extremely small, in respect to both length and width, with a bright pink mosquito net hanging around it. That first night, we often woke up, cramped and hot, to discover ourselves literally on top of each other. Although initially embarrassing, we began to find the situation more and more comical. To our surprise and delight, we discovered that we had the same sense of humor. From then on, we discussed our sleeping habits openly and complained about the other's loud snoring. We began to stay up late into the night discussing our lives and the difficult issues we each had to deal with. One night we talked into the early hours of the morning about his life in San Francisco. I could only listen wide-eyed and in disbelief as he talked about how close he had been to joining an El Salvadorian gang. I watched him with intense curiosity as he slowly told his story. I noticed how he would almost squeeze his eyes closed with his large cheeks when he was remembering something that made him angry, or thrust his chin out in a clumsy manner when he was excited. He told me of how he had been ready to be beaten into the gang. When I asked him why he would be willing to do that, he responded by describing how vicious his world was, and then explained that the initiation was a tiny price for the protection he would get from the gang in return. My respect for him only increased when I sat silently as he told me of his best friend who had been shot in the head in a drive-by shooting.

Thursday, October 24, 2019

Business & Ethics of Becton Dickinson and the Safety Syringe Controversy Author

Becton Dickinson has been in the middle of the controversy regarding the manufacturing, sale and monopoly of safety syringes used by hospitals, clinics, and doctor and dentist offices.   When the epidemic of AIDS and other lethal and infectious diseases spread across the nation, healthcare workers were still using a conceptualization of the original type of syringe created over 150 years ago (Holding and Carlsen, 1998; Holding and Carlsen, 1998).The healthcare workers realized that they were no longer safe and fought to get safer standards and equipment for use in the work place.By 1998, the federal patent office has given patents to over 1000 designs for safety syringes.   However, only a few were on the market and their initial cost was exorbitant. Even with the Occupational Safety and Health Administration’s (OSHA) enactment of the Bloodborne Pathogen Standard in 1991, and the Needlestick Safety and Prevention Act little has been truly done to protect the healthcare wor kers (Holding & Carlsen, 1998; Holding and Carlsen, 1998, Armstrong, 1991; Vadgama, 2002; Workers at risk, 2002).A prime example was in 2002 when it was approximated that 1600 healthcare workers could contract HIV through needle sticks in that year (Vadgama, 2002),   with a rough estimate cost of $255,000 for the direct and indirect costs associated with that one needle stick (Armstrong, 1991).The fact that Becton Dickinson purchased a number of the patents for safer syringes, they only offered on size when they finally started to manufacture the syringe.   The 3cc was fine for a few tasks in hospitals and clinics, but the 5cc and 10cc were used more often.Becton Dickinson did not offer the shielded syringes in this size, and by buying patents and negotiating with medical supply companies they did not need to make any other size.They continued to sell their original syringes (Holding & Carlson, 1998; Holding & Carlsen, 1998).   These actions defined by the utilitarian approach shows that the company was doing what was good for the company.   In essence, Becton Dickinson was basing their decisions on the corporate population rather than the public.After court battles and settlements the Becton Dickinson Company has finally begun to manufacture all types of safety syringes.   While they are not recommended, they are made and sold .The fact is that while Becton Dickinson was fighting to keep the new safety syringes from the public, Retractable Technologies, Inc created a better and safer syringe with top recommendations for safety and ease of use (Holding, 1991; Holding & Carlsen, 1998).   If Becton Dickinson would have acted ethically and manufactured and researched safety syringes, they would be at the top of the industry. References Armstrong, S. E. (1991, November/December). The Cost of Needle-Stick Injuries: The Impact of Safer Medical Devices.   Nursing Economics. 9(6).   pp. 426-433. Retrieved January 8, 2009 from http://search.ebscohost.co m/login.aspx?direct=true&db=hch&AN=12182254&site=ehost-liveHolding, R.  (April 14, 1998).  Safety Designs Proposed — But Not Produced.  Ã‚  San Francisco Chronicle.  ,  p.A7.  Retrieved  January 10, 2009,  from  Opposing Viewpoints Resource Center  via  Gale: http://find.galegroup.com/ips/start.do?prodId=IPSHolding, R.,  &  Carlsen, W.  (April 13, 1998).  Epidemic Ravages Caregivers / Thousands die from diseases contracted through needle sticks.  Ã‚  San Francisco Chronicle.  ,  p.A1.  Retrieved  January 10, 2009,  from  Opposing Viewpoints Resource Center  via  Gale:

Wednesday, October 23, 2019

Information and Communication Technology in the Philippines Essay

Information and Communication Technology (ICT) has become and will continue to be an integral part of the day-to-day life of every Filipino across all levels of our society. Information has always played a vital role in our history. Over the ages, people have used it to gain a more accurate picture of their current situation, make better decisions for the future, and improve the quality of their lives. But never has information been more accessible and more widespread than it is today. The latest improvements in Information and Communications Technology (ICT) have been impressive. Computers are progressively becoming smaller, more affordable, and more powerful. They are capable of storing an almost vast amount of data and information. And they are interconnected through telephone lines, satellites, and fiber-optic cables that span across the world, allowing the ability to communicate and share information with one another across borders. The pervasiveness of communication technology around the world necessitates that government embark on a cohesive and coordinated strategy on how to prepare its citizens to survive, live and thrive in a digital world. The world is experiencing a digital revolution and the Philippines have the opportunity to play an enormous role in it. Information and Communications Technology (ICT) is an important part in the country’s development. Opportunities abound with the help of ICT. The current ICT master plan for the Philippines dates back to 2006. With all of the new developments in this highly dynamic field, there is clearly a need to develop a new blueprint on how the country and its people can benefit from the use of ICT in governance, our economy and improving one’s way of life. The Philippines positions itself at the forefront of the digital revolution – dynamic and in command of the future. ICT is used extensively in the delivery of career information and guidance. Such usage covers wide range of applications. The role of ICT in guidance can be seen in three ways: as a tool, as an alternative, or as an agent of change. The growth of websites and helplines as forms of technically mediated service delivery means that the potential of ICT as a change agent is now greater than ever before. Current business-command the optimization of ICT usage to support national objectives of becoming a high income developed country. Thus as an enable, ICT in public sector must be addressed in general manner including people, process and technology where internal and external needs must be taken into place. The ICT evolution will take place with or without a systematic, comprehensive and articulated policy. However, the lack of a coherent policy is likely to contribute to the development (or prolonged existence) of ineffective infrastructure and a waste of resources. The importance of ICT policies is understood at the highest political level in many developing countries, and some countries have already adopted their own policies. The effectiveness of an ICT policy in one country does not guarantee that the same method would work in another and many developing countries face similar constraints that need to be taken into account when ICT policies are formulated. Philippines’ ICT against Other Countries ICT Development Current trends the world over the pointed to the fact that the major developments in the information economy. It resulted in revolutionizing the way people communicate and for the governments and firms to interact and conduct business. The presence of a reliable, accessible and affordable Philippine Information and communications infrastructure is a necessary condition for our participation in the information economy. Without it, our country will once again face the prospect of being marginalized in the global economy. The next part of this case study will discuss a brief ICT’s plan and current situation of our 3 neighboring countries; Singapore One of the key drivers of the Singapore’s Economic growth is their ICT. The island state is well connected via both fixed and wireless networks. By early 2012, their mobile penetration has passed 150%. By maintaining Singapore’s status as an ICT market leader, the government launched its plan for a nationwide fibre-based broadband network known as the Next Generation Broadband Network (NGNBN) and this is being rolled out in line with the government’s strategy. Hong Kong The world’s freest economy, characterized by free trade, free market and free flow of capital with stable and freely convertible currency and no foreign exchange controls. Their ICT development, the free flow of information with no censorship on content transmission provided a good environment for the development of web-based businesses such as content and media and cloud computing. In the next few years’ government will increasingly adopt cloud-based services. Such initiative will spawn opportunities for vendors and providers. Their telecommunications infrastructure is one of the most sophisticated in the world, with a wide range of innovative and advance services available in relatively low prices. The country also ensure the online secure. Hong Kong Computer Emergency Response Team Coordination Centre (HKCERT) was set up to coordinate responses to computer security incident, promote information security and take preventive measures against Internet Security threats. Malaysia Malaysia’s national transformation agenda envisions an innovative citizen-centric model of public service delivery accordance with the country’s principles. This is undertaken in tandem with a bold economic transformation approach to propel their countries in to a high-income economy by 2020. The effective utilization and application of information and communications technology (ICT) across multi-faceted service delivery of internal and government operations. The developments of country’s future where the ICT implementation comprise a suite of service offerings and infrastructure development that support a fundamental shift towards a collaborative and co-operative arrangement of open consultation, open data, shared knowledge and expertise. The Malaysian Public Sector ICT Strategic Plan (2011-2015) provides the blueprint to accelerate the innovative utilization and development of ICT in readiness for the ever-changing service landscape facing their public sector. Is it our country really prepared for this to compete with our neighboring countries? Can we level up our ICT sector with them? How ready is our country to harness the fast phase and benefits of information and communications technology? Our country’s main department about ICT related issues is the ICTO (Information and Communications Technology Office) which is under the Department of Science and Technology which is the former Commission on Information and Communications Technology (ICT). The ICTO’s primary thrusts for 2011-2016 are in the areas of ICT Industry Development, E-government, ICT Policy Development, ICT infrastructure and Cyber security. As designated organization by our government ICTO will ensure the development and implementation of comprehensive program to sustained the growth and comprehensiveness of ICT industries segments and firms; formulate an integrated program to support the growth of the ICT industry in the regions; undertake the development of an industry-relevant curriculum in coordination with the industry, government and academe to enhance the competitiveness of the ICT workforce, formulate, recommend and implement a comprehensive and harmonized ICT promotions and advocacy programs. Facilitating ICTO’s mandate in formulation ICT policies, implementing ICT plans and programs, leading international ICT cooperation bodies, and other related functions is the ICT Governance Policy and Planning group, which take lead in multi-stakeholder policy development. Primary initiatives for the policy and planning includes; National Connectivity and Broadband Development Plan, Philippine Digital Strategy (PDS) Implementation Plan, Cyber security and Data Privacy, ICT Procurement Standards, Digital TV Migration, ICT Standardization and the Philippine ICT statistics Portal. Ensuring that ICT access and Internet opportunities are available for the entire country is made possible by the development of effective and sustainable and strategic ICT infrastructure. The ICT infrastructure Group through its various programs ensures that these connectivity requirements are met in an efficient and effective manner. These projects include the TV White Space Initiatives (TVWS), Government Fiber Core Network, Upgrade of National Microwave Network, Cloud Top e-Learning for Public Schools and Internet TV Testbed. With all the documents presented our country’s policies regarding in boosting our ICT development and infrastructure are impressive. But only question is that, is there will be enough budget that the government will provide to sustain these developments? We might left behind in many aspects with our neighboring countries in terms of ICT development but we can still move forward and have these implemented with the right manpower, policy and full support from our government and private sector as well. Recommendation for ICT Development We are all contributors to the development of the global economy. Globalization, which is made possible by the ICT revolution, has extremely changed the rules of the development of it. Efficiency more than ever is now an indicator of competitiveness to achieve our nations goals. Nations, corporations and people that find the means to become more efficient will advance and prosper. We all know that in our country ICT will be one of the major drivers for boosting economy, and as a critical tool for better governance, corporate performance and individual achievement as a Filipino. Our government’s should provide an enabling policy, legal and regulatory environment for the ICT development. This means that our government should act as a facilitator and its involvement should be predictable, developmental, transparent and efficient. With more transparency in government operations and diminishing corruption by placing more government data in the public domain using the Internet, thus increasing opportunities for public scrutiny. For government more improvement for ICT development they must build public trust, enhance citizen to participate in government projects and activities, improve government’s public services online, and improve country’s competitive ness thru more efficient government operations. Another factors that needs to give attention to our country’s ICT development are the private sectors, civic organizations and society, international organizations they the role and responsibility as well. There are some actions that need to implement in order for these organization to help on enhancing our ICT programs: * By providing knowledge tools and enhance capacity in industry sectors to take advantage the ICT. * Create an environment for job growth in ICT and ICT-enable job all over the country if possible. * Promote an environment that entices investments for ICT research, innovation, development & manufacturing In order to ensure the success and sustainability of ICT initiatives, investors should be enabled by ensuring their direct participation during its conceptualization, planning and implementation. These sectors have the role as well to provide investments, capitals and other resources. By this the project for the ICT sector will be higher change of success and sustainability if these are market-led, rather than government-led. Let us not also forget the LGUs, schools and other community organizations, they must be consulted and their specific requirements are determined. They as well have an active involvement to the operations in building the ICT of our country on their own respective area of jurisdiction. Many of us today use the Internet for a variety of reasons: e-mailing to connect with friends and family, for business and work correspondence, web-browsing for news, research and entertainment, and increasingly for richer media and applications, such as watching online TV, posting videos and photos, as well as creating Internet content through blogs and other interactive forum. Being able to use the Internet has become an important necessity to any social and work life. For many different reasons, there are also many Filipinos who are not able to access the benefits the Internet has to offer. Some cannot afford the Internet or computers; others do not know how to use the Internet; and there are parts of the country where there is no Internet service or even electricity available, such as in more rural areas. Not only is the possibility and ability to use the Internet important for individuals, but also for countries as a whole. In our globalized world, the connectedness and Internet capabilities of a country are important elements for its competitiveness. Developing the Internet, including to rural areas, leads to new opportunities for nonagricultural employment, better paying agricultural jobs and greater overall productivity. Access to the Internet also promotes small and microbusiness growth, allows people in remote areas to work from home, offers greater access to crop market prices and enables rural businesses perhaps to compete more successfully even in the world markets. As far as I can say creating Internet opportunities for all guarantees that the Philippines has an inclusive growth and helps eliminate poverty.

Tuesday, October 22, 2019

precision agriculture essays

precision agriculture essays Soil can vary from one point to the next in its chemical and physical makeup, which makes it very diverse. Crop yield and variations within the field can be influenced by soil properties, or pollutants that move through soil, and then into the groundwater, or runoff into lakes and streams. The importance of precision agriculture is to determine the exact areas that need to be managed to maximize yield, minimize environmental impacts, and optimize the use of resources. Precision agriculture also helps determine changes in soil quality over time, and the presence of pollutants such as salts, pesticides, and fertilizers. Many farmers face the same dilemma everywhere; How to increase profitability on their farms, so that they can remain competitive? The old solution would be to increase the size of the farm by economies of scale. However, many farmers believe that there could be something more accurate then just keeping daily journals of farming activities that include: planting dates, crop variety, and relying on crop consultants. Local cooperatives are now educating farmers on precision agriculture and the benefits of putting fertilizer where it is needed the most (Robert, Roggenbuck, Oct. 2002). Precision Agriculture is defined as information and technology based agricultural management system to identify, analyze, and manage site-soil spatial and temporal variability within fields for optimum profitability, sustainability, and protection of the environment. Precision agriculture requires information about soil properties, elevation, and landscapes, and how these characteristics affect plant growth and crop progress throughout the field each season. To determine crop production from one part of the field to another, yield monitors can be used. There are many different types of sensors being used in precision agriculture. The measurement of light reflected from a field are the most common sensors used. A camera with color, or co...

Monday, October 21, 2019

buy custom Sociology of Sexuality essay

buy custom Sociology of Sexuality essay In politics, if you want anything said, ask a man. If you want anything done, ask a woman (Thatcher, 1965). The saying contains the truth. Moreover, it emphasizes the fact that there is a prejudiced treatment of both genders towards one another in politics. However, such state of affairs is typical not only of the political sphere, but also of social, economic, cultural and other spheres of life. The problem is widely discussed by psychologists and sociologists all over the world.Initially, it is necessary to define the notion of sex. Generally, this word means the indicator of the obvious physical and biological characteristics that establish the differences between males and females (Nobelius, 2004). The differences may be biological, physical, psychological and genetic. For example, such dissimilarities may include higher timbre of females voice than males one, females ability to bear children, physical strength of men, and some others. There also exist sex differences in language usage. According to some stereotypes, it is considered that a woman can talk more than a man; a woman is also likely to use adjectives, such as divine, charming, cute.Women tend to use question intonation in response to inquiries: About ten o'clock?, as a reply to: What time's dinner?. Probably, this insecure style of conversation is typical for 'powerless' people, who are somewhat nervous and afraid of antagonizing others. Powerless people come from either sex. However, the most significant difference found between men and women by linguists is womens tendency to speak in a prestigious way. They try to use language close to the standard one.What can be said about the word gender is that it is used to denote socially established patterns and behaviors, as well as roles and attributes. They are realized through different means including family, educational institutions and work organizations. The gender roles and behaviors also depend on the individuals values, customs, religions an d beliefs (Office of the Special Adviser on Gender Issues and the Advancement of Women, United Nations, 2011).Sometimes people relate term sex to the concept gender. However, it is not correct because though some similarities exist, they are not alike. Sex indicator distinguishes male from female, depending on biological characteristics, while gender from masculinity to femininity, indicates men and womens functions and roles in the society. Sex is something given to a person from the first day of his/her existence, whereas gender is not inbuilt, but learnt and acquired through a process of development and socialization.Gender identification starts in the childhood. Between the ages of two and three, children begin to acquire gender roles and stereotypes by the types of toys and games they want to play. Gender identification continues during adulthood and is established via two major theories: social learning theory and gender schema theory. Social learning theory uses the methods of punishment and modeling, while according to the gender schema theory, males and females cultivate mental categories from the childhood and perform their gender roles in the manner they were programmed.The concept sexuality means human capacity to have erotic perceptions, experiences and responses. In other words, the notion describes men and womens sexual desires. The concept of sexuality may vary according to biological, physical, emotional, or spiritual context (Science Encyclopedia, 2014).The concepts sex, gender and sexuality are embedded into the process of social construction of reality, as they indicate individuals roles in society and peoples relations with each other. In sociology, these social constructs are explained by the theory of social constructionism. The main point in understanding this theory lies in the fact that every individual interprets the reality in his own way. It means he/she has a subjective image of the objective reality in his/her mind. Sexual relat ions and romantic communication are based on this individual comprehension of the world. Therefore, every human is entitled to have any kind of intimate relationships with anyone, even with the person of the same sex.I have been complicit in perpetuating the reality of the social constructs of sex, gender and sexuality during all my life. They defined my position in society and my profession. For example, as I belong to male gender, I have always strived for success, for being strong and powerful. For this reason, I am sure I will be dominant in my family in future. The social construct of sexuality identified my communication with men and my intimate relations with them. Genetically, I am heterosexual and I always had sexual desires only about girls and women. However, several times I got up in the morning remembering the awful dreams about boys, which I was seeing during the night. Of course, I tried to resist those thoughts because everything happened unconsciously.Therefore, by the notion of sex I meant to define the obvious physical and biological differences between males and females. Gender is the indicator of the socially established patterns and behaviors, roles and attributes. Sexuality means human capacity to have erotic perceptions and experiences. The concepts sex, gender and sexuality are embedded into the process of social construction of reality. They identify peoples role in society and communication with each other, including sexual relationships. Buy custom Sociology of Sexuality essay

Sunday, October 20, 2019

Missing Information in APA Referencing

Missing Information in APA Referencing Missing Information in APA Referencing Referencing can be tricky even if you have all the source details. But what do you do when you can’t find an author’s name or a date of publication? In this post, we look at how to deal with missing information in APA referencing. Sources Without a Named Author: Organizational Authors Not every source will name the person who wrote it. When this happens, you can cite an organizational author instead (i.e., the company or organization that produced the source): Anonymity can affect the psyche over prolonged periods (American Psychological Association, 2008). Here, for example, we’re citing the American Psychological Association. We would then cite the same organizational author in the reference list at the end of the document. For instance: American Psychological Association (2008). The Psychological Effects of Anonymity on Self-Esteem. New York, NY: APA Press Inc. If you cite a source like this more than once, you may also want to abbreviate the organization’s name. You can do this within a citation by adding the abbreviation in square brackets: Anonymity can affect the psyche over prolonged periods (American Psychological Association [APA], 2008). On the next citation, we would then use the abbreviation by itself instead of repeating the full organization name again. Sources Without a Named Author: Anonymous Authors If a source truly has no author to name, APA recommends using the title in place of a name in citations and the reference list. If the title is quite long, you should also shorten it. For instance, we could cite an anonymous book called How to Cite Sources Effectively like this: Citing sources with missing information can be difficult (How to Cite, 2001). We would then use the full source title in place of an author’s name in the reference list. The only time you should attribute something to â€Å"Anonymous† is when the author is listed as such on the source. Sources Without a Year of Publication If you cannot find a date of publication for a source, use the phrase â€Å"n.d.† This is short for â€Å"no date.† We would use it in a citation like this, for instance: Time makes fools of us all (Smith, n.d.). We would then also use â€Å"n.d.† in place of a year in the reference list. Sources Without Page Numbers Possibly the most common issues of missing information in APA referencing is that some sources, such as websites, do not have page numbers. In cases like this, APA says you can use a paragraph number in citations: Smith (2003) rejects the â€Å"supposed need for page numbers† (para. 6). As a rule, paragraph numbers are most useful for shorter documents where you can quickly count the number of paragraphs therein (or for sources that come with pre-numbered paragraphs). Summary: Missing Information in APA Referencing If you cannot find full source information, APA referencing suggests: Cite an organizational author if a source is missing a named author. If there is no suitable organizational author either, use the source title instead. Use the abbreviation â€Å"n.d.† if a source has no year of publication. Use a paragraph number if a source has no page numbers. The points above should cover most cases of missing information in APA. However, remember to check carefully before using these methods. Most sources will have the information you need available, even if it is not easy to spot at first. And don’t forget that you can have your work proofread to make sure your referencing is complete.

Saturday, October 19, 2019

Financial Management Fundamentals Essay Example | Topics and Well Written Essays - 1500 words

Financial Management Fundamentals - Essay Example The company may face problems in meeting its short term obligations. The company has not raised long term debts and its long term liability is only pension liability. Accordingly the company is very low geared. Earning per share and dividend per share are so attractive that company will get oversubscribed whenever the company will go public. The detailed financial analysis follows: Profitability of Nichols Plc. have been analyzed from three angles, namely, Net Margins, Return on Assets(ROA) , and Return on Equity (ROE). Financial statements for Nichols Plc. have presented the profitability for 2006 (and restated figures for 2005) before and after taking into account exceptional items. Accordingly the profitability analysis have been made from both angles, i.e., before and after the exceptional effects on profitability. The following ratio calculations have helped in reaching an investigative analysis: Net profit margin â€Å"also called the Return on sales ratio, it shows after tax profit(net income) generated by each sales dollar by measuring the percentage of sales revenue retained by the company after operating expenses, creditor interest expenses, and income taxed have been paid.†(BDC)1. Net Profit Margins have shown a tremendous jump from 7.37 % to 10.01 despite the fact the sales revenue has been reduced from 63.336m in 2005 to 52.296m in current year 2006. That means Nichols has worked on some strategic issues and kept the qualitative business alive that generates the real profits for the company. This fact is clearer when a reference is made net profit margins after the exceptional adjustments; the increase in net margin is by huge 5.54%. Also the Chairman’s Statement makes the issue of profitability absolutely clear when it states that, â€Å"the progress made in underlying profitability is actually much greater than the headline figures suggest, due to di storting effects of Balmorals disposals completed in January 2006.† As

Friday, October 18, 2019

Civil Religion in Israel Essay Example | Topics and Well Written Essays - 3750 words

Civil Religion in Israel - Essay Example Indeed, De Lange argues that, â€Å"Jews today are more deeply divided than at any time in the past on the theory and practice of their religion. The divisions are visible in the existence of a multiplicity of synagogues in some towns, all proclaiming that they hold the key to true Judaism† (De Lange, pg. 67). In recent history one of the crucial periods of the Judaic tradition was the time immediately surrounding the pre-state and post-state periods. During this period in Jewish history the religion experienced tremendous internal strife and influence from political elements within Judaism that sought that co-opt the traditional Jewish religion for a civil religion that would promote and eventually realize the development of a Jewish state, Israel. This essay argues that during this period the Jewish religion, later civil religion, went through a series of evolutionary patterns in terms of influence and change. The essay explores this evolutionary development from the pre-sta te period, wherein Zionist elements shifted elements of the religious structure to emphasize statehood; it then considers the statism period wherein Judaism was fully co-opted by the state; and finally, the post-statism period where in a struggle for legitimacy the civil religion was forced to shift back to more traditional values. Throughout this examination of the shifting nature of the civil religion, a number of observations are made, with the overarching contention being that Jewish leaders consciously re-interpreted scripture in accord with political aims. Background One of the primary elements in the evolution of the Jewish religion considers it in relation to the emancipatory movements of the 18th and 19th centuries. In these regards, it’s been indicated that these movements presented a great amount of pressure of Jewish collective identity, having a corresponding effect on Jewish religious practices. In these regards, emphasis on balaka changed considerably, with the emancipation process deemphasizing many of these aspects of Jewish law (Dowty 2001). The main point in these concerns regards was the extent that the Jewish religion in Israel should conform to Western culture and values. In terms of altering Jewish religious practices, the main changes proposed related to whether the Jewish religion should be changed to conform to national standards, or if Judaism should continue to follow its standard tradition. While this had been a long-standing element of concern within Judaism the emancipation movement constituted a pivotal element in this regard. In consider essential elements related to Judaism in the 20th century, this essay argues that one of the primary thematic elements is the dynamic relation between political concerns and religious identity, resulting in philosophic fluctuations regarding Jewish spiritual practices. Early thinkers considered the questions that would later play pivotal roles in terms of the Jewish religion in Israel. I n these regards, it’s noted that Haim Yosef Brenner, â€Å"denied that Judaism was defined by specific patterns of life or values, or that the Jewish people had any special mission. He refused to recognize secular nationalism as a legitimate transformation of the Jewish traditional and eschewed ‘any ideology offering itself as equivalent to religious belief† (Liebman, pg. 27). This is a view of Judaism that ran counter to Zionist beliefs in a sort of secular nationalism. One must consider the intentions of the Zionist movement in regards to that of traditional Judaism when understanding the divergent patterns. It’s argued that the Zionist concern with attracting supporters and adherents

Beowulf Comparison Essay Example | Topics and Well Written Essays - 750 words

Beowulf Comparison - Essay Example Characterization entailed the poet’s imagination and the themes around those times with most poems having protagonists and antagonists. This is why the poems had aspects of heroes, battles, bravery, loyalty, feuds, meditations on fate and life including harsh aspects such as exile, monsters, as well as transience and treasure. ‘Beowulf’ is no different from Old English poems, one of them being ‘Battle of Maldon’. Both poems are written in Old English, which uses a different kind of grammar from the modern one. ‘Battle of Maldon’ is an old English poem written in Anglo-Saxon style (Bowman 91-115). The old English evolved to what is spoken in the present times and tended to be Germanic while exhibiting minimal French and Latin influence. In order to understand the poem in a deeper sense, students should be somehow familiar with Anglo-Saxon poetry rudiments. Anglo-Saxon poets used alliterative verse. This form of verse uses alliteration as the major stylistic device to join lines of poetry. This is the opposite of devices used in structuring rhymes. In alliteration, the a-verse or first half of a line is linked with the b-verse or second half via similar initial sounds. Additionally, a caesura divides the two halves. This is a pause usually represented in the form of a gap appearing on a page. The poems have reduced elements of internal rhyme but have repeated phrases, which they reused. Both ‘Battle of Maldon’ and ‘Beowulf’ are a series of stanzas, which narrate of heroic, mythical events from a Germanic past and end with the poet’s plight. The Anglo-Saxon style depicts a form known as accentual verse with four beats in each line meaning every half line has two beats. Alliteration is fulfilled in the poem through use of epithets, which is a formula of pronunciation different from the modern English. Another significant stylistic device in Beowulf is the

Thursday, October 17, 2019

See the attachment for the title, because is to big Essay

See the attachment for the title, because is to big - Essay Example the use of another; a confidence respecting property reposed in one person, who is termed the trustee, for the benefit of another, who is called the cestui que trust. Law of equity and trust confers the provision regarding the trust. It laid down several duties and responsibilities for the trustees. Moreover there are provisions like co-ownership, proprietary estoppels, fiduciary relationship etc. Apart from this, one of the prominent feature of trust is, it can be raised from either trust deed/covenant as said before or by the Will, i.e. a testamentary trust is a trust created by a Will or a codicil to a Will. A testament is a Will. of or includes land and the trustees of such a trust are trustees of land. Any description of trust includes an implied resulting or constructive trust and a bare trust. (1) An implied trust is based on the presumed intention of the parties at the time the property is acquired by the resulting trustee. That is the point at which the contributors beneficial interests crystallise. The beneficial shares are unaffected by subsequent conduct. This scope of implied trust has been rightly explained in Cowcher v Cowcher (2). Moreover a trust can be defined as a "land" which includes land of any tenure and property divided either vertically or horizontal (as in the case of a block of flats) and easements, but does not include an undivided share in land. (3)Now we shall scrutinize how far the scope of trust of land and its various ingredients will help to analyze the issues brought up in the given problem. Co-ownership (4) is where a person is entitled to hold land together with others who have simultaneous interests at the same time they are said to hold concurrently. Where ever there is co ownership there will be a trust of land. There are 2 types of co-ownership --------------------------------------------------------------------------------------------------------- So in this case Ayesha can claim her share in the property as she is

King Creon and Antigone Essay Example | Topics and Well Written Essays - 750 words

King Creon and Antigone - Essay Example In the play, a fight between brothers over the control of Thebes resulted to their deaths. Unfortunately, their deaths are perceived differently by Antigone and King Creon. According to King Creon, Polynices who is one of their brothers that had died in the war does not deserve a proper burial because he fought against his people (Sophocles 2). On the other hand, Antigone argues that it is crucial for her brother to be given a proper burial because he is their blood. This variation in thought about the burial of Polynices is the one that led to the emergence of other issues. In the play, it is also evident that there was a clash of wills between Antigone and King Creon. This is evidenced by Antigone’s view about the essence of maintaining and observing the family’s sacredness in making any decision in life (Sophocles 3). According to her, it was the duty of family members to give one of their own a proper burial. On the other hand, King Creon believed that whoever goes against his country does not deserve any respect from anyone including his or her family members. Pride is also another element that contributed significantly to the creation of a big gap between King Creon and Antigone. According to the scenes in the play, it is pride that made King Creon decide not to offer his brother a proper burial. It is also his perception on the position of women in the society that made him ensure that the death of Polynices is not mourned by people. Additionally, it is Creon’s position as a king that made him not to accept Antigone’s opinion about the burial of their brother (Sophocles 2). In addition, Antigone’s pride also barred her from accepting the decision that was made by the king about Polynices’ burial. The decisions made by both the king and Antigone also shows that there was an issue of duties and values. This is evidenced by Antigone’s assertion that it was her duty to ensure her brother was

Wednesday, October 16, 2019

See the attachment for the title, because is to big Essay

See the attachment for the title, because is to big - Essay Example the use of another; a confidence respecting property reposed in one person, who is termed the trustee, for the benefit of another, who is called the cestui que trust. Law of equity and trust confers the provision regarding the trust. It laid down several duties and responsibilities for the trustees. Moreover there are provisions like co-ownership, proprietary estoppels, fiduciary relationship etc. Apart from this, one of the prominent feature of trust is, it can be raised from either trust deed/covenant as said before or by the Will, i.e. a testamentary trust is a trust created by a Will or a codicil to a Will. A testament is a Will. of or includes land and the trustees of such a trust are trustees of land. Any description of trust includes an implied resulting or constructive trust and a bare trust. (1) An implied trust is based on the presumed intention of the parties at the time the property is acquired by the resulting trustee. That is the point at which the contributors beneficial interests crystallise. The beneficial shares are unaffected by subsequent conduct. This scope of implied trust has been rightly explained in Cowcher v Cowcher (2). Moreover a trust can be defined as a "land" which includes land of any tenure and property divided either vertically or horizontal (as in the case of a block of flats) and easements, but does not include an undivided share in land. (3)Now we shall scrutinize how far the scope of trust of land and its various ingredients will help to analyze the issues brought up in the given problem. Co-ownership (4) is where a person is entitled to hold land together with others who have simultaneous interests at the same time they are said to hold concurrently. Where ever there is co ownership there will be a trust of land. There are 2 types of co-ownership --------------------------------------------------------------------------------------------------------- So in this case Ayesha can claim her share in the property as she is

Tuesday, October 15, 2019

African American Culture withing the NYPD Essay

African American Culture withing the NYPD - Essay Example There are various aspects that can be discussed about NYPD and this piece of work focuses on the culture within this police department with much emphasis being given to the African American culture and how it is portrayed within the police department1. Culture is basically a way of life of people and how people interact or relate with one another based on their different backgrounds in terms of race, ethnicity, nationality, beliefs and values, religion, language among other aspects that define a person or community. African American culture entails the cultural aspects or contributions of the Americans that are of African origin to the overall culture in the United States, which could be witnessed either as distinctive or as an integral part of the American culture. The African American culture is an aspect that has got its origin in Africa has had a substantial influence on the American culture through the assimilation of various cultural values most of which are beneficial. Cultural differences among people has been linked with differences in how people treat one another and this is also evident within the New York city police department where there is a very great difference in how the African Americans are treated as compared to people of other races. This, for example, can be seen in the ranking within the department among other issues in regard to general treatment where they are even accused falsely and treated in an inhumane manner to an extent of being killed illegally. The African American culture has been experienced in different ways within the NYPD. A good example is that concerning the music industry specifically rap and hip-hop. New York has been known as the capital of hip hop which has created the hip hop generation. The African American culture has facilitated the use of the hip hop music to perpetrate many aspects some of them being political in nature making it a point of concern to the New Yolk

Monday, October 14, 2019

Approaches of New Criticism Essay Example for Free

Approaches of New Criticism Essay A literary movement that started in the late 1920s and 1930s and originated in reaction to traditional criticism that new critics saw as largely concerned with matters extraneous to the text, e.g., with the biography or psychology of the author or the works relationship to literary history. New Criticism proposed that a work of literary art should be regarded as autonomous, and so should not be judged by reference to considerations beyond itself. A poem consists less of a series of referential and verifiable statements about the real world beyond it, than of the presentation and sophisticated organization of a set of complex experiences in a verbal form (Hawkes, pp. 150-151). Major figures of New Criticism include I. A. Richards, T. S. Eliot, Cleanth Brooks, David Daiches, William Empson, Murray Krieger, John Crowe Ransom, Allen Tate, F. R. Leavis, Robert Penn Warren, W. K. Wimsatt, R. P. Blackmur, Rene Wellek, Ausin Warren, and Ivor Winters. Archetypal/Myth Criticism A form of criticism based largely on the works of C. G. Jung (YOONG) and Joseph Campbell (and myth itself). Some of the schools major figures include Robert Graves, Francis Fergusson, Philip Wheelwright, Leslie Fiedler, Northrop Frye, Maud Bodkin, and G. Wilson Knight. These critics view the genres and individual plot patterns of literature, including highly sophisticated and realistic works, as recurrences of certain archetypes and essential mythic formulae. Archetypes, according to Jung, are primordial images; the psychic residue of repeated types of experience in the lives of very ancient ancestors which are inherited in the collective unconscious of the human race and are expressed in myths, religion, dreams, and private fantasies, as well as in the works of literature (Abrams, p. 10, 112). Some common examples of archetypes include water, sun, moon, colors, circles, the Great Mother, Wise Old Man, etc. In terms of archetypal criticism, the color white might be associated with in nocence or could signify death or the supernatural. Psychoanalytic Criticism The application of specific psychological principles (particularly those of Sigmund Freud and Jacques Lacan [zhawk lawk-KAWN]) to the study of literature. Psychoanalytic criticism may focus on the writers psyche, the study of the creative process, the study of psychological types and principles present within works of literature, or the effects of literature upon its readers (Wellek and Warren, p. 81). In addition to Freud and Lacan, major figures include Shoshona Felman, Jane Gallop, Norman Holland, George Klein, Elizabeth Wright, Frederick Hoffman, and, Simon Lesser. Marxism A sociological approach to literature that viewed works of literature or art as the products of historical forces that can be analyzed by looking at the material conditions in which they were formed. In Marxist ideology, what we often classify as a world view (such as the Victorian age) is actually the articulations of the dominant class. Marxism generally focuses on the clash between the dominant and repressed classes in any given age and also may encourage art to imitate what is often termed an objective reality. Contemporary Marxism is much broader in its focus, and views art as simultaneously reflective and autonomous to the age in which it was produced. The Frankfurt School is also associated with Marxism (Abrams, p. 178, Childers and Hentzi, pp. 175-179). Major figures include Karl Marx, Terry Eagleton, Fredric Jameson, Raymond Williams, Louis Althusser (ALT-whos-sair), Walter Benjamin (ben-yeh-MEEN), Antonio Gramsci (GRAWM-shee), Georg Lukacs (lou-KOTCH), and Friedrich Engels, Theordor Adorno (a-DOR-no), Edward Ahern, Gilles Deleuze (DAY-looz) and Felix Guattari (GUAT-eh-ree Postcolonialism Literally, postcolonialism refers to the period following the decline of colonialism, e.g., the end or lessening of domination by European empires. Although the term postcolonialism generally refers to the period after colonialism, the distinction is not always made. In its use as a critical approach, postcolonialism refers to a collection of theoretical and critical strategies used to examine the culture (literature, politics, history, and so forth) of former colonies of the European empires, and their relation to the rest of the world (Makaryk 155 see General Resources below). Among the many challenges facing postcolonial writers are the attempt both to resurrect their culture and to combat preconceptions about their culture. Edward Said, for example, uses the word Orientalism to describe the discourse about the East constructed by the West. Major figures include Edward Said (sah-EED), Homi Bhabha (bah-bah), Frantz Fanon (fah-NAWN), Gayatri Spivak, Chinua Achebe (ah-CHAY-bay) , Wo le Soyinka, Salman Rushdie, Jamaica Kincaid, and Buchi Emecheta Existentialism Existentialism is a philosophy (promoted especially by Jean-Paul Sartre and Albert Camus) that views each person as an isolated being who is cast into an alien universe, and conceives the world as possessing no inherent human truth, value, or meaning. A persons life, then, as it moves from the nothingness from which it came toward the nothingness where it must end, defines an existence which is both anguished and absurd (Guerin). In a world without sense, all choices are possible, a situation which Sartre viewed as human beings central dilemma: Man [woman] is condemned to be free. In contrast to atheist existentialism, SÃ ¸ren Kierkegaard theorized that belief in God (given that we are provided with no proof or assurance) required a conscious choice or leap of faith. The major figures include SÃ ¸ren Kierkegaard, Friedrich Nietzsche, Martin Heidegger, Jean-Paul Sartre (sart or SAR-treh), Albert Camus (kah-MUE or ka-MOO) , Simone de Beauvoir (bohv-WAHR) , Martin Buber, Karl Jaspers (YASS-pers), and Maurice Merleau-Ponty (mer-LOH pawn-TEE). Structuralism Structuralism Structuralism is a way of thinking about the world which is predominantly concerned with the perceptions and description of structures. At its simplest, structuralism claims that the nature of every element in any given situation has no significance by itself, and in fact is determined by all the other elements involved in that situation. The full significance of any entity cannot be perceived unless and until it is integrated into the structure of which it forms a part (Hawkes, p. 11). Structuralists believe that all human activity is constructed, not natural or essential. Consequently, it is the systems of organization that are important (what we do is always a matter of selection within a given construct). By this formulation, any activity, from the actions of a narrative to not eating ones peas with a knife, takes place within a system of differences and has meaning only in its relation to other possible activities within that system, not to some meaning that emanates from nature or the divine (Childers Hentzi, p. 286.). Major figures include Claude LÃ ©vi-Strauss (LAY-vee-strows), A. J. Greimas (GREE-mahs), Jonathan Culler, Roland Barthes (bart), Ferdinand de Saussure (soh-SURR or soh-ZHOR), Roman Jakobson (YAH-keb-sen), Vladimir Propp, and Terence Hawkes. Post-Structuralism and Deconstruction Post-Structuralism (which is often used synonymously with Deconstruction or Postmodernism) is a reaction to structuralism and works against seeing language as a stable, closed system. It is a shift from seeing the poem or novel as a closed entity, equipped with definite meanings which it is the critics task to decipher, to seeing literature as irreducibly plural, an endless play of signifiers which can never be finally nailed down to a single center, essence, or meaning (Eagleton 120 see reference below under General References). Jacques Derridas (dair-ree-DAH) paper on Structure, Sign, and Play in the Discourse of the Human Sciences (delivered in 1966) proved particularly influential in the creation of post-structuralism. Derrida argued against, in essence, the notion of a knowable center (the Western ideal of logocentrism), a structure that could organize the differential play of language or thought but somehow remain immune to the same play it depicts (Abrams, 258-9). Derridas critique of structuralism also heralded the advent of deconstruction thatlike post-structuralismcritiques the notion of origin built into structuralism. In negative terms, deconstructionparticularly as articulated by Derridahas often come to be interpreted as anything goes since nothing has any real meaning or truth. More positively, it may posited that Derrida, like Paul de Man (de-MAHN) and other post-structuralists, really asks for rigor, that is, a type of interpretation that is constantly and ruthlessly self-conscious and on guard. Similarly, Christopher Norris (in Whats Wrong with Postmodernism?) launches a cogent argument against simplistic attacks of Derridas theories:

Sunday, October 13, 2019

Total Quality Management Information Technology Essay

Total Quality Management Information Technology Essay Indeed to focusing for why use six sigma. There are many great benefits of using six sigma in any business, but only we can truly determine wither it is right for our or not. The answer, it is a fact-based data driven statistical analysis of how business operates and where improvements can be made if executed properly. (Assistant, 2009) Thomas Pyzdek in his six sigma handbook mentioned a real story that began when Japanese firm took over a Motorola factory that manufactured Quasar television sets in USA in the 1970s, they promptly set about making drastic changes in the way the factory operated. Under Japanese management, the factory was soon producing TV sets with 1/20th as many defects as they had produced under Motorolas management. They did this using the same workforce, technology, and designs and did it while lowering costs, making it clear that the problem was Motorolas management. It took a while but, eventually, even Motorolas own executives finally admitted (Pyzdek, page 04, 2003) For more, Six Sigma is a tool to improve the effectiveness and quality of the process outputs in order to deliver customer satisfaction by recognizing and eliminating the causes of defects and drive down the inefficiency by minimizing variability in business processes. The six-sigma level reflects a process in which 99.99966% of the process is free of defects, in other words, no more than four dissatisfied customer experiences in every one million opportunities. Compared to a one-sigma process in which only 31% is free of defects, with the meaning of hundreds of thousands of dissatisfied customer experiences in every one million opportunities. As an example, one misspelled word in a library is considered six sigma, where as having one misspelled words in a cyclopedia is considered a five sigma, and 2 misspelled words in each page of a book is considered a 3 sigma. As you can see the main reason is to increase profitability with improve customer value and increase the business efficiency. Works Cited Assistant, b. S. (2009, 9 18). Retrieved 11 16, 2010, from Six Sigma Online: http://www.sixsigmaonline.org/six-sigma-training-certification-information/articles/six-sigma-trainingwhy-use-it.html Montgomery, D. C. (2005). Introduction to Statistical Quality Control. Wiley. Pearson, J. M. (2003, January 1). Manage your customers perception of quality. Pyzdek, T. (2003). The Six Sigma Handbook. Mc Graw- Hill trade. Evaluate the concept of Total Quality management from the perspective of various organizations. Discuss the tools and techniques of Total Quality Management for service organization in detail Total Quality Management (TQM) it is the enhancement to the traditional way of doing business. It is a proven technique to guarantee survival in world class competition. Only by changing the actions of management will the culture and actions of an entire organization be transformed. Total Made up of the whole Quality Degree of excellence o product or service. Management Act, art, or manner of handling, controlling, directing etc. TMQ is the art of managing the whole to achieve excellence. It is the set of guiding principles that represent the foundation of a continuously improving organization and application of qualitative methods and human resources to improve all the processes within organization and exceeds needs now and in the future. Its integrated fundamental management techniques, existing improvement efforts, and technical tools under a disciplined approach. Total quality management has six basic concepts: Management must participate in the quality program. A quality council must be established to develop a clear vision, set long-term goals, and direct the program. Quality goals are included in the business plan. An annual quality improvement program is established and involves input from the entire work force. Managers Focus on the customer. An excellent place to start is by satisfying internal customers. We must listen to the voice of the customer and emphasize design quality and defect prevention. All personnel must be trained in TQM, statistical process control, and other appropriate quality improvement skills, so they can effectively participate on project teams. Including internal customers and, for the matter, internal supplier on project team is an excellent approach. Those affected by the plan must be involved in its development and implementation. Changing behavior is the goal. People must come to work not only to do their jobs, but also to think about how to improve their jobs, people must be empowered at the lowest possible level to perform processes in an optimum level. There must be a continual striving to improve all business and production process. Quality improvement projects, such as on-time delivery, order entry efficiency, billing error rate, customer satisfaction, cycle time, scrap reduction, and supplier management are good places to begin. Technical techniques such as statistical process control, benchmarking, quality function development, ISO 9000, and designed experiments are excellent for problem solving. Works Cited Montgomery, D. C. (2005). Introduction to Statistical Quality Control. Wiley. Pearson, J. M. (2003, January 1). Manage your customers perception of quality. Pyzdek, T. (2003). The Six Sigma Handbook. Mc Graw- Hill trade. What is ISO 9000 standers? ISO 9000 standards are principles that the International Organization for Standardization or ISO, maintains. According to ISO9000Council, businesses that follow the standards successfully have an ISO 9000 QMT (quality management system). Function: The article We Need More Standards Like ISO 9000 describes ISO 9000 as a group of standards that companies implement to enhance performance in real life scenarios. Although many industries use ISO 9000 now, the standards were originally created for businesses that manufacture or design products. Features: ISO states the individual ISO 9000 standards outline practices needed to establish and maintain quality management. Covered issues include continual improvement, costs and benefits, leadership, quality assurance, quality system principles and risks. History: We Need More Standards like ISO 9000 reports that ISO 9000 originated from the British Standards Institute Technical Committees attempts to produce generic guidelines for quality manufacturing in 1979. ISO formalized the principles in 1987 by publishing ISO 9000, which is currently the organizations most implemented standard. Benefits: ISO 9000 helps companies determine exactly how to achieve quality in various areas, and enhance sales and relationships with consumers when they obtain ISO certification. Considerations: ISO 9000 Council states participating companies must create detailed ISO 9000 documentation explaining how the company applies the standards within the organization. Works Cited American Society for Quality: ISO 9000 and Other Standards Association for Computing Machinery: We Need More Standards Like ISO 9000 International Organization for Standardization: ISO 9000 Essentials ISO9000Council What are the seven basic quality tools? Stem-and-leaf plot or histogram: is the most commonly used graph to show frequency distributions. It looks very much like a bar chart, but there are important differences between them. Check sheet: is a structured, prepared from for collecting and analyzing data, so it will be used when data can be observed and collected repeatedly by the same person or at the same location. In this method decision should be taken what event or problem should be observed then operational definitions should be developed, and at what time data should be collected and for how long should be decided. Finally designing the form will be done. Set it up so that data can be recorded simply by making check marks. Pareto chart: is a bar graph. The lengths for the bars represent frequency or cost (time or money), and arranged with longest bars on the left and the shortest to the right. Cause-and-effect diagram: is a formal tool frequently useful in unlayering potential problem cases. It can be used to structure a brainstorming session. It immediately sorts ideas into useful categories. It can be used when identifying possible causes for a problem and also when a teams thinking tends to fall into ruts. Defect concentration diagram: is a picture of the unit, showing all relevant views. Then the various types of defects are down on the picture, and the diagram is analyzed to determine whether the location of the defects on the unit conveys any useful information about the potential causes of the defects. Scatter diagram: is a useful plot for identifying a potential relationship between two variables. If the variables are controlled, the points will fall along a line or curve. The better the correlation, the tighter the points will hug the line. Control chart: is a graph used to study how a process changes over time. Data are plotted in time order. A control chart always has a central line for the average, an upper line for the upper control limit and a lower line for the lower control limit. These lines are determined from historical data. By comparing current data to these lines, you can draw conclusions about whether the process variation is consistent (in control) or is unpredictable (out of control, affected by special causes of variation). Works Cited Montgomery, D. C. (2005). Introduction to Statistical Quality Control. Wiley. Pyzdek, T. (2003). The Six Sigma Handbook. Mc Graw- Hill trade. Explain the position of leadership in Total Quality Management. Discuss the characteristics of an effective leader regarding ensuring the quality of daily-use products in the current economic circumstances. The definition of the Leadership that who instills purposes, not one who controls by brute force. A leader strengthens and inspires the followers to accomplish shared goals. Leaders shape the organizations values, promote the organizations vales. An organizations senior leaders should set directions and create a customer focus, clear and visible values, and high expectations. The directions, values, and expectations should balance the needs of all your stakeholders. Leaders should ensure the creations of strategies, systems and methods for achieving excellence, stimulating innovation and building knowledge and capabilities. The values and strategies should help guide all activities and knowledge and capabilities. The values and strategies should help guide all activities and decisions of your organization. Senior leaders should inspire and motivate your entire workforce and should encourage all employees to contribute, to develop and learn to be innovative and to be creative. These are the following Characteristics of Quality Leaders They give priority attention to external and internal customers and their needs. Leaders place themselves in the customers choose and service their needs from that perspective. They continually evaluate the customers changing requirements. Leaders empower rather than control, subordinate they have the trust and confidence in the performance of their subordinates. They provide the resources, training and work environment to help subordinates to do their jobs. However the decision to accept responsibility lies within individual. They emphasize improvement rather than maintenance they use the phrase If it isnt perfect, improve it rather than If it isnt broke, dont fix it. There is always room for improvement, even if the improvement is small. Major breakthrough sometimes happen but its the little ones that keep the continuous process improvement on a positive track. They emphasize prevention. An ounce of prevention is a worth a pound of cure is certainly true. It is also true that perfection can be the enemy of creativity. We cant always wait until we have created the perfect process or product. There must be balance between preventing problems and developing better, but not perfect process. They encourage collaboration rather than competition. When functional areas, departments, or works groups are in competition, they may find suitable ways of working against each other or withholding information. Instead, there must be collaboration among and within units. They train and coach, rather than direct and supervise. Leaders know that the development of the human resource is a necessary. As coaches, they help their subordinates learn to do better job. They learn from problems. When a problem exists it is treated as an opportunity rather than something to be minimized or covered up. what caused it? and how can we prevent it in the future? are the questions quality leaders ask. They continually try to improve communication. Leaders continually disseminate information about the TQM efforts. They continually demonstrate their commitment to quality. They choose suppliers on the basis of quality, not price. Works Cited Assistant, b. S. (2009, 9 18). Retrieved 11 16, 2010, from Six Sigma Online: http://www.sixsigmaonline.org/six-sigma-training-certification-information/articles/six-sigma-trainingwhy-use-it.html Montgomery, D. C. (2005). Introduction to Statistical Quality Control. Wiley. Pyzdek, T. (2003). The Six Sigma Handbook. Mc Graw- Hill trade. Explain the customers perception regarding quality. Discuss the measures to be taken by a manufacturing organization to handle customer complaints to provide feedback for continuous process improvement. The basic concept of the TQM attitude is continuous process of improvement. This concept implies that there is no acceptable quality level because the customers needs values and expectation are constantly changing and becoming more demanding. By the way, customers have following perception regarding quality; Performance, Features, Service, Warranty, Price, and Reputation. The first of all is the performance, its involved fitness for use a phrase that indicates that the product and service is ready for the customers use at the time if sale. Other considerations are: Availability which is the probability that a product will operate when needed. Reliability is freedom from failure over time. Maintainability is the ease in keeping and operating product. The second is the features, identifiable features or attributes of a product or service are psychological time oriented contractual ethical and technological. Features are secondary characteristics of the product or service. For example the primary function of an automobile is transportation whereas a car stereo system is a feature of an automobile. The third is the service, an emphasis on customer service is emerging as a method for organizations to give the customer added value. However, customer service is an intangible-it is made up of many small things. All geared to changing the customers perception. Intangible characteristics are those traits that are not quantifiable, yet contribute greatly to customer satisfaction, providing excellent customers service is different from the more difficult to achieve than excellent product quality. Organizations that emphasize service never stop looking for and finding ways to serve their customers better, even if their customers are not complaining. The forth is the warranty, the product represents an organizations public promise of a quality product backed up by a guarantee of customer satisfactions. A warranty forces the organization has to focus on the characteristics of product and service quality and the importance the customer attaches to each of those characteristics. The sixth is the price, customers are willing to pay higher price to obtain value. Costumers are constantly evaluating one organizations products and services against those of its competitors to determine who provides the greatest value. The seventh is the reputation, most of us find ourselves rating organizations by our overall experience with them. Total customer satisfaction is based on the entire experience with the organization not just the product. Good experiences are repeated to six people and bad experiences are repeated to 15 people therefore it is more difficult to create a favorable reputation. (Pearson, 2003) Works Cited Montgomery, D. C. (2005). Introduction to Statistical Quality Control. Wiley. Pearson, J. M. (2003 , January 1). Manage your customers perception of quality. Suppose a product manager is trying to establish regulations concerning the maximum number of boxes that can occupy a forklift. It is given that the total weight of 8 boxes chosen at random follows a normal distribution with a mean of 820 kg and a standard deviation of 140 kg. What is the probability that the total weight of 8 boxes exceeds 880 kg? Look at z score table for probability is 0.66640 The data shown here are and R values for 24 samples of size n=5 taken from a process producing bearings. The measurements are made on the inside diameter of the bearing, with only the last three decimals recorded (i.e., 34.5 should be 0.50345) (5-1. Page248) Set up and R charts on this process seem to be in statistical control? If necessary, revise the trial control limits. If specifications on this diameter are 0.5030 Â ± 0.0010, find the percentage of nonconforming bearings produced by this process. Assume that diameter is normally distributed. From Table VI at n=5 , , Chart: The process is not in statistical control; x bar chart is beyond the UCL for both No. 12 and 15. Assuming an assignable cause is found for these two out-of-control points, the two samples can be excluded from the control limit calculations. R Chart Works Cited Montgomery, D. C. (2005). Introduction to Statistical Quality Control. Wiley.(pg.248) What is Kanban system? And what are the different types of Kanban system? The system that is used to achieve Just-in-Time (JIT) production is called Kanban system (Richards). This system is based on the part of pulling just the right amount of components or materials needed at the right time. It depends on the part of the customer demand which in turn acts as a reactive process from the supplier. As the word Kanban in Japanese means visible record or visible part, the mechanism used is a Kanban card which acts as a means of signal to replenish the materials or inventory repetitively within the organization (Bali, 2003). The Principle of the Kanban is to follow the pull system where until the customer sends the signal for the demand, the product will not be produced. Two main types of Kanban cards widely used are: Withdrawal (Conveyance) Kanban: This system enables to pass on the authorization to move the materials from stage to the other. It creates a cycle by moving the parts from stage to the next and keeps the remaining until the last one is consumed and this withdrawal Kanban goes back again to get the parts. The withdrawal card is specified with details such as material number, name, size, name or location of the next process and number of the materials needed. Production-ordering Kanban The Production Kanban is used to provide an order to the previous stage indicating to produce the kind and number of parts required. The production-ordering Kanban is often called an in-process Kanban or simply a production Kanban (Richards). The following information is necessary on the production Kanban card such as what materials are required, parts required and the information on the withdrawal card. The withdrawal card does not have this information as it is used only as a mean of communication between stages (Kanban Systems,). Some of the other cards are: Supplier Kanban/Subcontractor Kanban: When parts are needed by the assembly line, this Kanban is used to indicate orders given to outside suppliers (Just-in-Time/Kanban,). Here the parts required are in assembled form. Emergency Kanban: If any occurrence of defective work, then this Kanban card is temporarily inserted to correct it in case of demand. It is used only for extraordinary purposes and is later collected after usage. Through Kanban: When adjacent work centers are close to each other this Kanban is used as it combines both the withdrawal and production into one. Works Cited Bali, B. (2003). Kanban systems the Sterling Engine Manufacturing Cell. Baudin, M. (2001). Whats Unique about Kanban system? . What is the acceptance sampling problem, and what is advantages and disadvantages of sampling? According to chapter one in textbook acceptance sampling is concerned with inspection and decision making regarding products, one of the oldest aspects of quality assurance. Advantage of Acceptance Sampling: Less Expensive because of less inspection. Less handling of product hence that reduced damage. Applicable to destructive testing. Fewer personnel are involved in inspection activities. Greatly reduces the amount of inspection error. The rejection of entire lots as opposed to the simple return of defectives often provides a stronger motivation to the supplier for quality improvements. Disadvantage of Acceptance Sampling: Risks are there accepting bad lots and rejecting Good lots. Less information is usually generated about the product or about the process that manufactured the product. Requires the planning and documentation of the procedure in which 100% of inspection cannot be done.

Saturday, October 12, 2019

The Trade War between America (USA) and the European Union (EU) :: essays papers

Chiquita Brands International Inc. is best known as the world’s number one distributor of banana’s, which account for more than half of its sales. For the past decade, Chiquita’s sales have dropped dramatically and the company is now on the verge of bankruptcy. Currently, Chiquita is trying to avoid filing for a Chapter 11 by attempting a major financial restructuring of their debt. There are many factors that have contributed to the company’s downward spiral, although all of these factors are linked to the trade barriers imposed by the European Union on banana imports. The European Union enacted import restrictions on banana’s in 1993, and just recently, is attempting to revise the old regime in order to comply with the World Trade Organization. The EU is preparing to introduce a new import system dubbed â€Å"first-come first-served† which they believe will be a WTO compatible system. Chiquita filed a lawsuit in January, 2001 against the European Union seeking reparations in the amount of $525 million for their losses that resulted from the old biased import system (Palmer). Chiquita is just one of many companies that were affected by this biased import regime, but some other companies still managed to work around the import restrictions. Chiquita’s rivals, Dole Food and Fresh Del Monte, although bruised as well by the European restrictions and falling banana profits, are in much better shape. Both have managed to increase their market share in Europe, largely at Chiquita’s expense (Alden). Chiquita, however, sought out and fought a political battle against the European Union with the United States government backing them. The old EU import regime was not only an issue for the companies involved, but for the United States as a whole, since it affected banana’s and other agricultural products sold in the US. The regime initially was enacted in 1993, and was later ruled in 1997 to not be in compliance with the World Trade Organization (PR Newswire). The regime was designed in part to protect less efficient banana growers in former European colonies. Chiquita’s management has complained for years that the policies of the EU have cost the company millions by favoring banana’s from Caribbean producers in former European colonies. The EU’s rules were judged to discriminate in favor of growers in EU territories and the Caribbean at the expense of Latin American producers and U.

Friday, October 11, 2019

Defining Moments in Canada Essay

Defining Moments in Canadian History During the 20th century, there were many events and situations that helped define the country of Canada. There were positive moments, but also a good amount of negative ones. Of course, the successful events kept Canadians in a positive light, but the negative situations helped Canada learn from its mistakes and went to prove how strong and brave its citizens were/are. The three most defining moments would have to be the Dieppe Raid, the Invasion of Normandy, and the Battle of Vimy Ridge. These three events not only assisted the country to become what it has today, but has also defined what the nation has become. The first defining moment of the 20th century was the Battle of Vimy Ridge. This particular battle was a military engagement located in the Nord-Pas-de-Calais region of France during World War I. The main fighters were Canadian Corps against the German army. The battle took place from April 9 to 12, 1917. This was the beginning stage for the Battle of Arras, led by the British. â€Å"The Canadian Corps was ordered to seize Vimy Ridge in April 1917. Situated in northern France, the heavily-fortified seven-kilometre ridge held a commanding view over the Allied lines. The Canadians would be assaulting over an open graveyard since previous French attacks had failed with over 100,000 casualties. â€Å"(Cook) Main objectives were to take control over German-held high ground along an extensive escarpment. Doing so would allow the southern flank to advance without having to be heavily worried about enemy fire. With support from a nearby barrage, Canadians were able to capture most of the ridge within the first day of attack. The town of Thelus fell the second day, as did the crest of the ridge. The final objective was to capture another ridge located outside the town of Givenchy-en-Gohelle, which fell to the Canadian Corps on April 12. After that incident, the German forces had no choice but to retreat. This quick battle was successful due to a mix of tactical and technical innovation, powerful artillery support, extensive training, and thought-out planning. This event is a defining moment for Canada because it was the first time that all four sectors of the Canadian Expeditionary Force participated in a battle as a whole, therefore becoming a Canadian Nationalistic symbol of sacrifice and great achievement. â€Å"The Canadian success at Vimy demonstrated that no position was invulnerable to a meticulously planned and conducted assault. This success had a profound effect on Allied planning. Though the victory at Vimy came swiftly, it did not come without cost. There were 3,598 dead out of 10,602 Canadian casualties. After Vimy, the Canadian Corps went from one success to another, to be crowned by their achievements in the 1918 â€Å"advance to victory†. This record won for Canada a separate signature on the Versailles Peace Treaty ending the War.†(Battle of Vimy Ridge) The second definitive moment of the 20th century was the Dieppe Raid. This event was a World War II attack on the German occupied port of Dieppe on August 19,1942. The raid took place on the northern coast of France, and began around 5 am. Allied commanders were forced to call a retreat, a mere 6 hours later. Objectives included seizing and holding a major port to prove that it was possible and also to gather information. Allies also planned on destroying coastal defences, port structures, and all strategic buildings. The allied countries knew that they would eventually have to attack, so they figured they needed the practice. Another goal was to take some of Hitler’s attention off of trying to invade Russia. The plan was to use 5000 Canadians and have a 1-day attack and retreat on the Nazi-held coastal town of Dieppe. The plan was also to be secretive and attack at dark. None of these objectives were met. â€Å"The Soviet Union was pressuring the Allies to open a second front in Western Europe. The Allies, however, needed to build up their military resources before undertaking a full campaign. They felt that a large raid on the coast of France could force the Germans to divert more of their military resources away from the Soviet Union and also help in the planning for the full-scale assault to come. â€Å"(Canada Remembers) The first mistake was that they reached Dieppe in broad daylight, making this â€Å"surprise attack† not very surprising. Also, the Dieppe forces became on high alert at Dieppe because French agents warned them that the British were showing a great deal of interest in the area. When the Allied forces arrived at the port city, its flanking cliffs were well defended. Thesoldiers were met with very heavy machine gun fire from little stations dug into overlooking cliffs. The Allied fire support was not nearly adequate enough and the attackers were basically trapped on the beach by series of obstacles and never-ending German fire. After less than 6 hours, the Allies were forced to surrender and many of the soldiers were stranded on the port, to be k illed or to be taken prisoner by the Germans. The Allied forces were beaten severely, they definitely lost this battle, and they lost it hard. Numerous tactical and technical errors were made, resulting in huge amounts of Canadian deaths. â€Å"The raid was a disaster: More than 900 Canadian soldiers were killed, and thousands more were wounded and taken prisoner. Despite the bloodshed, the raid provided valuable lessons for subsequent Allied amphibious assaults on Africa, Italy and Normandy. â€Å"(Herd) This was, after all, one of the first attempts by the Allies on a German-held port. This was an important, defining moment for Canadians because the lessons learned there became the guidelines of what not to do in regards to future endeavours, and influenced preparations for the highly successful Normandy landings. The last definitive moment of the 20th century was the Invasion of Normandy (D-Day) on June 6, 1944. The Allies attacked the German-held beaches of Normandy, France towards the end of World War II. The landings were done in two phases; the first was an airborne assault landing consisting of 24 000 British, US, and Canadian soldiers shortly after midnight. The second was an amphibious landing around 6:30 am of Allied infantry. This attack was executed by all elements: land, sea, and air. The invasion required transportation of soldiers, and materials from England by aircraft and ships. These particular landings took place on an 20 km stretch of the Normandy coast on 5 seperate beach areas: Utah, Omaha, Gold, Juno, and Sword. The British armies took control over Sword and Gold, US took charge over Utah and Omaha, and Canadian forces stormed Juno. â€Å"On June 6th, 1944, the 3rd Canadian Infantry Division and the 2nd Armoured Brigade were tasked with establishing a bridgehead on the beach codenamed â€Å"Juno†. This was an eight-kilometre long stretch of beach bordering Saint-Aubin, Bernieres, Courseulles-sur-Mer and Graye-sur-Mer. Assault troops were then to move towards the Carpiquet airfield, 18 kilometres inland. The 3rd Infantry Division, under Major-General R. F. L. Keller, was under command of the Second British Army. It was flanked on the left by the 3rd British Infantry Division that was to land on Sword beach (Lion-sur-Mer, Langrune-sur-Mer). To the right, the 50th British Division had as its target â€Å"Gold Beach† (La Riviere, Le Hamel, and Arromanches).†(D-Day) Unlike the previous, unsuccessful raid at Dieppe, surprise was achieved at Normandy, thanks to bad weather and a very successful deception plan deployed in the months prior to the attack. The deceptive plan was used to distract Germany’s attention from the possibility of landings in Normandy. Another key success was to convince Adolf Hitler that landings would occur at the Pas-de-Calais. At the same time of the attack, there were also decoy operations taking place. â€Å"Fourteen thousand young Canadians stormed Juno Beach on D-Day. Their courage, determination and self-sacrifice were the immediate reasons for the success in those critical hours. The fighting they endured was fierce and frightening. The price they paid was high – the battles for the beachhead cost 340 Canadian lives and another 574 wounded. â€Å"(Juno Beach) By the end of D-Day, 30 000 Canadians had been successfully landed and all had penetrated further into France than any other Allied force! This was a defining moment for the country of Canada because, after all the previous, unsuccessful missions, they deserved a glorious victory. That is definitely what they got! All their hard work; preparing weapons, planting decoys, and all their extensive planning made this invasion so successful, and all the tedious work paid off. This event is definitive for me because my great-grandfather was involved in this attack, and thankfully returned home from it. There were definitely more than three defining moments for Canada during the 20th century, but the Battle of Vimy Ridge, the Dieppe Raid, and the Invasion of Normandy were three of the most significant. These events helped Canada grow as a nation, and made Canadians even more proud of their heritage and their country.

Thursday, October 10, 2019

Meditech Surgical Case Paper

Furthermore, suggestions will be made in order to improve Medicine's position and remain relative in the medical industry. Issues in new products, manufacturing of all products Some issues that have resulted from the introduction of new products have been issues with supply and customer service. Although finished goods seemed high, the level of service was very low. Another issue meditate is experiencing Is panic ordering which has allowed dealers and affiliates uncertain If a product will be delivered on time to Increase the size of the order, causing demand to Increase but monish actual supply.The data that was gathered demonstrated a new product reached a high peak during the first couple of weeks and maintained stable, however changes in production schedules have exceeded demand. Poor forecasting are some of the major Issues and low Inventory, an improvement In a regression analysis of past data will Increase areas of Improvement. Driving factors systemically and organizationally Issues that are affecting meditate systemically and organizationally are poor demand forecasts, which are allowing for high levels of inventory.A third party consultant determined that the current inventory could be reduced up to 40 percent. Although high inventory levels are high, service levels are low failing to meet the organizations objectives. These Issues affect not only sales but also the reputation of the organization, which causes the organizations status in the market to diminish. Furthermore Meditate took several Initiatives In accurately monitoring past demand forecasts to better determine and improve inventory demand. Customer Service Manager attention to current problemsThe role of customer service is to determine and handle various types of issues, which include customer complaints, and to develop effective strategies to improve customer service. Customer service ensures deliveries schedules are followed tongue Ana Is ten TLS contact Tort customers to vales AT any p ossible Issues or complaints. The increase in panic ordering and data to determine if panic ordering was occurring was difficult to track. The customer service manager ensured his staff to gather and observe past demands patterns, production rates, and demand recasts to further identify the decrease of customer service.Strategies to improve customer service Distribution Network Configuration The current issues that are affecting meditate are changes in demand patterns and increases in inventory. Configuring the network of distribution will ensure products are produced serve geographical dispersed retailers. Inventory control is highly important since customer demand change over time retailers must observe what point in time to reorder a given product and the minimum amount to Justify inventory ordering and carrying costs.Customer Service The measurement of customer value is highly important and will maximize meditates position in the market as new products designs, technology, and v alue arise in any given market what will allow a company to flourish over its competitors is high end customer service and value. By measuring past trends in the market and opportunities for improvement, this will allow meditate to gain the advantage in the market place. Smart Pricing In order to allow medicated to improve supply chain performance, smart pricing an allow meditate to influence pricing and inventory to influence market demand.As competition arise, to gain a competitive edge using effective marketing management can allow medicated to enter a new product more effectively and ensure the price and inventory is available for the consumer. Medicated goal is to keep its brand high and allow its reputation to grow as the leader in endoscopies surgical instruments. Conclusion To gain a competitive advantage in a given market by incorporating effective strategic management and an efficient supply chain will ensure the given products et organizational goals.